Wooden hospital bed 3 junctures-electric-fixed height

Geranio series

Structure in powder-coated tubular steel, top in welded steel mesh on the perimeter. Mounted on four 125mm swivel wheels all with total block. Wooden headboard, footboard and sides. Backrest and leg rests adjustable in height by electric actuators. Supports for patient lifts and IV pole. Patient lift pole, table and optional IV pole.

Bed dimension: cm 208x102x94h (headboard-footboard)

Frame dimension: cm 187x80x42,5h (from bed frame to ground)

Max height to headboard/footboard: cm 94

Backrest max inclination: 70°

Footrest max inclination: 30°

Max loading weight 135 Kg

Weight 77,5 Kg

PRODUCT CODE: MP370

Wooden hospital bed 3 juncture slat frame- electric – adjustable height- Gerbera series

Powder-coated tubular steel structure, wooden slats top. Mounted on four 125mm swivel wheels all with total block. Wooden headboard, footboard and sides. Backrest and leg rests adjustable in height by electric actuators. Height adjustable electrically. Supports for patient lifts and IV pole. Patient lift pole, table and optional IV pole.

Bed dimension: cm 208x102x116,5h (to headboard-footboard))

Frame dimension: cm 187x80x33,5÷65,5h (bed frame to ground)

Headboard/footboard: cm 116,5

Minimum height headboard/footboard: cm 22,5

Minimum height of chassis to ground: cm 22,5

Maximum inclination backrest: 70°

Maximum inclination footrest: 30°

Loading weight 135 Kg

Total weight 99 Kg

PRODUCT CODE: MP381

Wooden hospital bed 3 junctures -electric, adjustable height “Trendelemburg” – GARDENIA series

Powder-coated tubular steel structure, welded steel mesh top. Mounted on four 125mm swivel wheels all with total block. Wooden headboard, footboard and sides. Headrest and legrest adjustable by means of two electric actuators. Variable height by means of two actuators housed in the headboards of the bed and individually or simultaneously adjustable, so as to obtain the functions: level elevation – trendelenburg – against trendelenburg. Supports for patient lift and IV pole. Patient lift pole, table, optional IV pole. 

Bed dimension: cm 216x102x127h

Bed dimension: cm 187x80x40÷81h

Maximum height at headboard/footboard: cm 127

Minimum height at headboard/footboard: cm 25

Headrest max inclination: 70°

Legrests max inclination: 30°

Max inclination “Trendelemburg” (head down’, legs up): 12°

Max inclination“Reverse-trendelemburg” (head up, legs down’): 12°

Max loading weight: 135 kg

Total weight: 84 kg

PRODUCT CODE: MP390

Wooden hospital bed 3 junctures electric,easy, adjustable height “Trendelemburg”- Gardenia series

Structure in powder-coated tubular steel, top in welded steel mesh on the perimeter. Mounted on four 125mm swivel wheels all with total block. Wooden headboard, footboard and sides. Headrest and legrest adjustable by means of two electric actuators. Variable height by means of two actuators housed in the headboards of the visible bed and individually or simultaneously adjustable, to obtain the functions: elevation in plan – trendelenburg – against trendelenburg. Supports for patient lift and IV pole. Patient lift pole, table, optional IV pole. 

Bed dimension: cm 216x102x127h

Bed dimension: cm 187x80x40÷81h

Maximum height at backrest/legrest: cm 127

Minimum height atbackrest/legrest : cm 25

Maximum inclination backrest: 70°

Maximum inclination legrest: 30°

Maximum inclination “Trendelemburg” (head down’, legs up): 12°

Maximum inclination“Reverse trendelemburg” (head up, legs down’): 12°

Max loading weight: 135 kg

Total weight: 84 kg

PRODUCT CODE: MP391

Matrix G24

Matrix G24 was created as a solution in the fight against injuries caused by accidental falls. With parts applied in natural wood, creates a more familiar environment without neglecting the features to help care for patients with high risk of dementia, making this an ideal bed for nursing homes and long-term care units. With pre-defined medical positions, safety features and tools to reduce hospitalisation times, it is a versatile bed, that fulfils the therapeutic requirements of most patients and an indispensable tool for healthcare professionals.

Robust Architecture

Lifting system with trapezoidal arms electrically articulated by 2 linear motors (Linak).

240-780 mm lifting stroke and maximum patient load of 185 Kg.

Handset Control

Highly shock resistant.

Portable control powered by an extendable helical cable.

Positions

Back and Legs

Height

Reverse Trendelenburg

Cardiac Chair

Examination

Rest

High Comfort

Matrix G24 has many features. such as the articulated hospital bed, the therapeutic mattress and the natural wood protections, that contribute to create a favourable opinion of the patients who rest in it, contributing to faster recoveries and more pleasant stays. Intuitive and secure side guard rail locking also increases the quality of care and makes the bed easier for healthcare professionals to use.

Hand-held Control

Highly shock resistant. Powered by helical cable. The hand-held control gives the patient control of all bed articulations and allows advanced functions of Reversed Trendelenburg, Cardiac Chair, Examination and Rest.

Pressure Ulcer Prevention

The articulation of the mattress platform (back + legs) causes harmful muscular pressure in the abdominal and lumbar areas. By lifting the articulations, they simultaneously perform a synchronous gliding. This double self-regression of the back and leg articulations causes decompression and relief of the sacroiliac area, usually a critical point in the development of pressure ulcers.

Self-Confidence

One of the factors that most increases muscle degradation in the elderly is immobilisation. In bedridden patients, it is extremely important to create an environment so that they feel confident in their motor skills, in order to regain mobility and autonomy. To this end, Matrix G24 has features that make the patient feel safe to do small tasks autonomously, such as the hand-held control with advanced functions for the elderly to place themselves in the position they feel most comfortable, or intuitive and secure side guard rail locking also increases the quality of care and makes the bed easier for healthcare professionals to use.

Hygiene Components

 The headboard and foot panels are produced in natural wood, material with great capacity for hygiene and disinfection, durability and high resistance to shock. The bed board is made up of 11 modular components in PPC plastic, removable for cleaning using a quick-lock system.

Total Disinfection

The design of the bed was conceived in order to facilitate the cleaning processes. Reducing dirt accumulation points as much as possible. The components are minimalist and without sharp corners, greatly reducing the accumulation of waste.

Fall Prevention

 The side guard rails meet the EN 60601-2-52 standard through components with adequate spaces to avoid entrapment of body parts for patients and caregivers. High vertical coverage and the possibility of creating a wide opening at the foot of the bed reduces the risk of injuries caused by accidental falls and prevents patients from climbing the guard rails in disorientation episodes. In addition to the guard rails, the 24 cm bed height and the Rest function provide a safe stay for patients with and without psychological problems.

Medical Positions

Matrix G24 is equipped with advanced bed positioning functions, performing complex and precise movements with the push of a button. It also incorporates features that facilitate and speed up care delivery with alarms and stops at key angles, such as back at 30º or bed horizontality.

Vascular Position

The height of the foot section is adjustable point by point by a rack for manual use. When combined with Auto Contour and Trendelenburg, it can improve circulation of blood to the heart, a necessary procedure in reducing the risk of hypovolemic shock and after some vascular surgeries.

Special Axle

Matrix U24. The system includes four Ø100 mm rotating wheels to improve mobility, two of them with central brakes, and two free Ø125 mm rotating wheels to enable the bed to be adjusted in height.

Luna G 

The robustness and reliability of the entire system provide the necessary peace of mind for effective care. With simple electrical functions, the geriatric bed Luna G is inserted as an economical alternative to increase accessibility to quality health care.

Positions:

aks theraplot

Scientifically developed, clinically tested and practically implemented. The bestseller that optimally satisfies all requirements.

The advantages of the aks theraplot:

Particularly well-suited for cachectic patients and for pain therapy

Large support area made of soft, pink foam

Adapts perfectly to the body profile and provides maximum support area

Best pressure relief classes according to HMV

The cube-shaped, green middle layer favours the microclimate

Due to three graduated, different compression hardnesses, this mattress is suitable for a patient weight of 35 to 150 kg

Optimum adjustment of the mattress to four-section lying areas using three recesses

Edge zone reinforcement on both sides for support of the mobilisation of the patient

Suitable for re-use

Optional: Mattress extension (20 cm) to accommodate larger patients incl. inkoair® mattress cover

Upon delivery, mattresses are covered, vacuumed and rolled

Patient weight 35-150 kg

For decubitus prophylaxis and therapy support up to and including Grade III (acc. to EPUAP)

aks viscoplot

The logical further development of the aks theraplot, with viscoelastic lying area. Anti-decubitus soft lying mattress made of foam which, as a high-end product, also meets the highest requirements.

The advantages of the aks viscoplot:

Particularly well-suited for cachectic patients and for pain therapy

Large support area made of soft, viscoelastic foam; adapts perfectly to the body profile and provides maximum support area

The cube-shaped recesses in the green middle layer favour the microclimate

Graduated, different compression hardnesses, in combination with viscoelastic support area for a patient weight of 30 to 150 kg

Optimum adjustment of the mattress to four-section lying areas using three recesses

Edge zone reinforcement on both sides for support of the mobilisation of the patient

Ideally suited to re-use

Optional: Mattress extension (20 cm) to accommodate larger patients

incl. inkoair® mattress cover

Upon delivery, mattresses are covered, vacuumed and rolled

Patient weight 30-150 kg

For decubitus prophylaxis and therapy support up to and including Grade III (acc. to EPUAP)

aks duoplot RV/ aks duoplot plus RV

Suitable for decubitus prophylaxis and therapy support with edge zone reinforcement

The advantages of the aks duoplot RV/aks duoplot plus RV:

Optimum pressure relief thanks to large support area made of soft foam

Reinforced edge zone for stable sitting on the edge of the mattress and easier transfer to the chair/wheelchair

Reduces shear forces and produces favourable microclimate through incisions below the surface

Suitable for bedding cachectic patients and patients in pain

Available in widths of 90 cm and 100 cm and in heights of 12 and 14 cm (aks duoplot plus RV)

Incl. aks inkoair® mattress cover, especially suitable for patients with incontinence

Mattress cover certified according to OEKO-Tex® Standard 100 (product class I)

Mattress cover free of latex, bi-elastic and washable at up to 95 °C

Optional: extender (20 cm)

Upon delivery, mattresses are vacuumed and rolled

Patient weight 40-120 kg for 12 cm height and 40-140 kg for 14 cm height

For decubitus prophylaxis and therapy support up to and including Grade III (acc. to EPUAP)

aks varioplus

The mattress with removable foam cubes for more flexibility and fine adjustment. The removable cubes of this mattress enable anatomically individual body adjustment and good soft lying for optimised pressure distribution.

The advantages of the aks varioplus:

Combination cube mattress made of high-quality foams

Soft lying and hollow positioning with different compression hardnesses and heights of the removable cubes for more precise, individual body adjustment

Rounded cube surfaces for optimised distribution of the patient weight on the largest possible area, improved reduction of the support pressure

The drop-in grille system connects the various cubes to each other

Areas with decubitus can be supported almost without pressure

Soft and firmer cubes in accordance with anatomical requirements are already inserted when the mattress is shipped.

The design and the fine cut of the cubes leave enough free space for optimum air circulation between patient and mattress.

Including inkoair® mattress cover (also available separately)

Upon delivery, mattresses are vacuumed and rolled

Patient weight 40-120 kg

For decubitus prophylaxis and therapy support up to and including Grade II (acc. to EPUAP).

aks maxiplot

For decubitus prophylaxis and therapy with optimum price/ performance ratio. This reasonably priced cube mattress is suitable for decubitus therapy support and has proved successful for many years.

The advantages of the aks maxiplot:

Cube mattress at an attractive price

144 (90 x 200 cm) or 162 (100 x 200 cm) firmly attached foam cubes with specially rounded surfaces

Distribution of the patient's weight and reduction of the support pressure

Precisely incorporated air ducts for improved air circulation

Easy handling due to low weight

Upon delivery, mattresses are vacuumed and rolled to save space

Continuous use for home care and in the elderly and nursing home sector

Optionally available with aks inkocover stretch cover or inkoair® mattress cover (also available separately)

Patient weight 40-110 kg

For decubitus prophylaxis and therapy support up to and including Grade I (acc. to EPUAP).

aks microplot plus

For decubitus prophylaxis and therapy. The plus to stable soft lying. Cube mattress with stable trough for optimum soft lying. Also specially for low body weights due to particularly soft, cube structured horizontal area.

The advantages of the aks microplot plus:

Cube-structured lying area with low compression hardness for optimised soft lying

Specially rounded cube surfaces provide better distribution of the patient weight on the largest possible area; this causes reduction of the support pressure with reduction of the shear forces

The cube section makes air circulation in the mattress possible

Edge zone reinforcement for support of the mobilisation of the patient

Adaptable for adjustment of the bed lying area

Optionally available with aks inkocover stretch cover or inkoair® mattress cover (also available separately)

Upon delivery, mattresses are vacuumed and rolled

Patient weight 40-120 kg

For decubitus prophylaxis and therapy support up to and including Grade II (acc. to EPUAP).

Moretti SPA having been focused on the patient's care products, could not be left out from extra quality memory foam cushion series with a variety of shapes, uses and price range. Memory foam pillows for post-operational pain relief, for a more comfortable sleep, or transforming the seating experience, maximizing the blood flow and minimizing the pressure to the spinal cord.